Differences

This shows you the differences between two versions of the page.

--- start:onboarddyne [2025/04/01 19:42] – mcopeland
+++ start:onboarddyne [2025/04/01 19:53] (current) – mcopeland
@@ Line 39: / Line 39: @@
 Platform Access – Disable encryption code when applicable.
+------------------------------------------------------------
+**Video Settings**
+Video/Audio
+Video – You will need to check both the Main and Sub- streams.
+Video Type – Ensure each Channel No. is set to the proper type. If IP cameras, select “Video & Audio.”
+Resolution – Should be the highest option possible.
+Bitrate – Variable
+Video Quality - Higher
+Frame Rate – Should be set at 20 for Main and Full Frame Rate for Sub
+Video Encoding – H.265 when applicable.
+H.264+/H.265+ - OFF
+Channel-zero – Disabled
+--------------------
+**Other Settings like Image, OSD(On Screen Display)**
+Image
+OSD Settings – This is where you will label each camera.
+Event
+Video Loss – Click Enable Video Loss Detection and Send Email under the Linkage Method on each channel.
+Exception – Enable Send Email for all Exception Types (EXCEPT HDD Full and Illegal Login). Disable all Audible Warnings.
+Storage
+Schedule Settings – Ensure each channel has recording enabled. If audio, you will have to click Advanced to ensure Record Audio is enabled as well.
+Storage Management – This is where you will format the hard drive and check the status of it.