-   Start off by using the device tool for the camera manufacturer, for instance, SADP for Hikvision, GV-IP Device Utility for Geovision, etc.
  -   Once the camera has been activated (step 1 above), log into the IP address you have selected using Internet Explorer mode of Edge.
  -   Label the camera under Configuration-->System Settings -->Basic Information-->Device Name
  -   Adjust Daylight Savings Time (DST) under Configuration-->System Settings -->DST
    - Check Enable DST
    - Change Start Time to MAR Second
    - Change End Time to NOV First
    - Change DST Bias to 60 minutes
    - Click Save
  - Go to Time Settings under Configuration-->System Settings -->Time Settings, select Manual Time Sync. and click the Sync. with computer time checkbox, and then click Save.
  -